WILWOOD DYNAPRO 6 BRAKE CALIPERS & PADS,DP6,RALLY CAR,ROAD RACING,0.81",3",RED

Description

You are bidding on a
Set of
Brand New Wilwood
DynaPro 6 Lug Mount (DP6)
Racing Brake Calipers & Polymatrix BP-10 Smart Compound Brake Pads (Part #120-10134-RD, #120-10135-RD, and #150-10006K).
Features Red Powder Coating.
Includes both the left side and right side calipers, as well as the brake pads for both.
We have 3 different series of this same caliper with 3 different piston sizes.  We have them with a total piston area of 5.06, 4.04, and 3.08 inches squared.  This series has a total piston area of 3.08 inches squared.  The other series are available in our
Ebay store.
Fits 0.81" Thick rotors
Calipers feature Six Pistons each, Two-1.38" and Four-1.00"
Great for use in Street Rods, Street/Strip, Rally, Road Racing, Dirt Late Models, Dirt and Pavement Modifieds, Drag Racing, Sprint Cars, Midgets, Off-road racing, and many other high performance & industrial applications
DynaPro 6 Caliper Detail:
The DP6 marks a noteworthy step in the evolution of the DynaPro caliper series. DP6 calipers offer the performance advantages of a larger pad and a six piston differential bore configuration, with complete bolt-on interchange ability to the four piston 5.25" lug mount DynaPro models, and the long standing Dynalite caliper series.
As with the previous DynaPro models, the strength of the DP6 is a combination of process and design. Premium grade alloy billets are stress-flow forged resulting in a highly efficient, high strength body. Stress flow forging re-aligns the internal grain structure of the metal within the contour of the caliper body. This process is proven to provide superior strength over any other process derived from castings or straight billet block machining. FEA assisted solid modeling design technology was employed to find the optimum balance between lightweight with superior strength against deflection and body separation under high load.
In addition to the sturdy, yet stylish body, the DP6 incorporates race proven technology and the latest Wilwood performance enhancements. Pad clamping force is generated by six heavy wall stainless pistons configured in a leading to trailing edge differential bore pattern. The heavy wall pistons have been re-engineered to fully resist backside deflection at high pressures while maintaining balanced pad loading for even wear over the length of the pad. Stainless steel resists corrosion while inhibiting direct heat transfer from the pads to caliper body, seals, and fluid.
The DP6 uses the upgraded type 6712 pad that provide the larger overall volume size from the previous Dynalite and DynaPro four-piston models. The pads are retaining with exclusive Wilwood Quick-E clips for simplified pad service and maintenance without caliper removal. Stainless steel SRS bridge plates are used to dampen engagement harmonics, eliminate pad rattle, and protect the caliper bridges from gouging by the pad edges. Four corner bleeds and internal fluid passages accommodate front or rear mounting and simplified gas evacuation regardless of mounting position.
Polymatrix BP-10 Smart Pad Compound:
Heat Range:
Low to Medium-High
Cool Torque:
Medium
Hot Torque:
Medium-High
Wear Rate:
Medium
Polymatrix BP-10 Smart Pad Compound:  Medium friction compound with the low noise and low dust of a street performance compound and the increased friction characteristics of a semi-metallic race compound.  Smooth engagement with consistent response from a flat-torque curve throughout its entire effective temperature range.  Good low to middle temperature wear rates.  Beds quickly and provides fast response without excessive abrasion on vented-iron rotors.
In our Ebay Store, you can find thousands of other brake parts, including these calipers & pads individual and in sets.
We also have thousands of other High Performance Parts in our
store.
Shipping:
There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it's after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.
Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option.  WE DON'T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do.
Shipping cost will be .99 within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.  We will be glad to ship internationally.  Just send me a message for an international shipping quote.
Accepted payment methods:
We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.